|
This newly developed drill motor from Husqvarna is extremely easy to operate. The DM 330 features an ergonomic handle that makes it easy to carry around. The controls are designed and positioned to further enhance ergonomics and to facilitate drilling. The DM 330 can be used on all of Husqvarna’s larger drill stands, and for drill bits from 50 to 350 mm in diameter. The machine has three gear stages, so you can find the optimal drilling speed.
To facilitate drilling during the initial stages, as well as during the operation, a button can be pressed to reduce the speed by half. This feature is useful when making a starter hole or cutting through reinforcements.
DM 330 can be used on all of Husqvarna’s larger drill stands, such as the DS 50 ATS.
If the motor runs at too high a load for a long period, it will start to pulsate. If the load is not reduced the motor will shut off, to prevent overheating. Elgard™ significantly increases the machine’s service life.
An electronic current limiter for softer starts. Full speed is reached about two seconds after the switch is turned on.
- 2 versions for high and low speeds.
- Water-cooled gearbox.
- Equipped with overload indicator (LED).
- Water hose can be turned 180°.
|
